Description
401X Quad WHT Handheld VHF Wireless Microphone System Specifications:
401X Quad overall system performance Frequency Response: 30-18KHz (-3dB)
Dynamic Range 120dB: (20-20KHz)
Total Harmonic Distortion: <0.5% (typical)
RF Carrier Frequency Range: 170-230MHz (Factory installed Channels)
Frequency Stability: +/- 0.005%, crystal controlled
Modulation FM (F3E): +/-15KHz nor,+/-30KHz max
Operating Range: 250 feet typical”up to 500+ feet optimum line-of-sight
Frequency Group 1Channel A = 171.905 MHz
Channel B = 185.15 MHz
Channel D = 209.150 MHz
Channel N = 197.150 MHz
Frequency Group 2Channel E4 = 173.8 MHz
Channel H = 191.3 MHz
Channel F = 203.4 MHz
Channel E = 215.2 MHz
WHT Handheld Microphone Transmitter: Audio Inputs: Nady DM-10D neodymium dynamic cartridge
Controls:
OFF/STANDBY/ON switch
LED Indicator Unit “ON” (single flash), Low Battery Alert (steady)
RF Power Out 50mW (Max. allowed by FCC)
Harmonic & Spurious Emissions <-40dB
Battery 9V Alkaline
Battery Life Up to 20 hours
Dimensions: 9.5″ X 1.4″ Diameter (24.1 X 3.5 cm)
Weight (w/o battery): 6.9 oz (193 g)
401X Quad receiver Controls; Power ON/OFF, volume control, mute control
Connectors:
1 unbalanced adjustable mixed (all four channel)
1/4″ T-S audio output jack. Line level, 600 ohms
balanced fixed level XLR. #1=GND, #2-3=signals
Line/Mic level, 11k/600 ohms
Receiver: 2.1 mm barrel-type DC input jack (tip=positive)
LED Indicators: 1 Power ON LED, 4 AF LED, 4 TX ON LED
Dimensions: 1.75″x 7.5″x 16.5″(4.4 x 19 x 42 cm)
Weight: 4.5 lbs (2 Kg)
Power Requirements: 16V @ 800mA, nominal, AC/DC adapter supplied
Antenna Connectors: Dual female BNC connectors
